VB Semi Air Suspension Fiat Ducato/Peugeot Boxer

VB

£1,428.00

Description

VB Semi Air Suspension Fiat Ducato/Peugeot Boxer

 

 

 

VB Semi Air Suspension Fiat Ducato/Peugeot Boxer

The VB-Semi air suspensions, manually adjustable within certain limits, can be installed on vehicles with leaf springs.

The air bellows, mounted between the frame and the rear axle, support the existing leaf springs and, not being connected to each other, allow for separate adjustment of the left and right side through two filling valves / switches (depending on the model ).

The VB-Semi Air double chamber system thus ensures vehicle stabilization even in the event of uneven load distribution.

The valves (for the basic kit) / high / low switches (for the comfort kit) allow optimum inflation of the air bellows, thus allowing the vehicle to be raised or lowered.

Advantages of VB-Semi Air:

  • Higher ride level and longer spring travel.
  • Greater stability.
  • Less stress on the shock absorbers.
  • Lower risk of asymmetrical position thanks to the double chamber system.
  • Variable elastic force.
  • Quick installation thanks to the plug-and-play system.
  • Damage protection on bodywork, equipment and cargo.
  • Heavy loads not visible from the outside.

 

VB-Semi Air comfort system

The VB-Semi Air comfort system consists of a VB-Semi Air basic system with control panel with 2 pressure gauges, 2 high / low switches and a powerful high-performance compressor.

 

The high / low switch allows you to increase or decrease the vehicle’s ride level in order to inflate the air bellows to the ideal pressure. The pressure gauges ensure an accurate reading of the pressure (in bar) in the pneumatic bellows.

 

 

The VB-Semi Air comfort system is a good solution for vehicles carrying variable loads. The control panel with high / low switch allows you to adjust the VB-Semi Air system to the correct pressure.

The control panel for the VB-Semi Air comfort system is available in two versions:

Light commercial vehicles – Control panel mounted on the driver’s seat

Camper – Control panel mounted in the vehicle’s dashboard

 

The VB-Semi Air Comfort kit consists of:

  • 2 8 ″ pneumatic bellows
  • 1 pressure gauge kit (seat or dashboard based on request),
  • 1 compressor
  • 2 high / low switches
  • 1 harness
  • 2 brackets
  • 2 pipes
  • 1 fixing set.

This particular air suspension is only for the x250 x290 chassis. Please contact us if you need further assistance on another model.

 

Installation Details

Once your order has been placed we will contact you within 24hrs to confirm your order and a quick consultation. You will then be offered an installation date.

On the evening before your installation you will receive a courtesy call from your engineer who will advise you on a time of arrival.

On the day of installation you will be consulted on how and the whereabouts of the product and where it will be positioned.

A full demonstration will be shown and full paperwork (warranty card) will be completed before your engineer leaves your property.

Any questions please do not hesitate to contact us.

Auto Additions Nationwide

Auto Additions Logo

01332 238352

07402860877